RO PCB Board

 

Mekhoa ea ho etsa le ho kenya e hatisitsoeng ea boto ea potoloho (PCB) e hloka ho hloekisoa ha metsi a hloekileng le metsi a litšila. Metsi a phahameng-purity deionized (DI) a bohlokoa bakeng sa ho tlosa litšila tsa tikoloho, solder, kapa litšila tse ling ho liboto tsa potoloho. Sena se lumella baetsi ba PCB ho sebetsana le lihlahisoa tsa boleng bo holimo ntle le ho senya likarolo leha e le life. Ho phaella ho{4}}metsi a hloekisitsoeng a hloekileng, metsi a litšila a tsoang ts'ebetsong ea tlhahiso ea boto ea potoloho le 'ona a hloka phekolo. Ts'ebetso ea litšila le metsi a ho hlatsoa li ka ba le litšila tsa tšepe (nickel, koporo, silevera, khauta, loto, thini) hammoho le litšila tse ling tse sa rateheng (pH, TOC, TDS) 'me li tlameha ho hloekisoa pele li ntšoa kapa li sebelisoa hape.

 

 

 

 

Boto ena ea k'homphieutha e na le ts'ebetso ea ho laola bophelo le cartridge.

• Nako ea ho felloa ke nako ea khatriji: lebitso la cartridge, mabone a khubelu, a lamunu le a mosehla a panya.
• Ho felloa ke nako ha RO: lebitso la cartridge, lebitso la RO, khubelu, lamunu le lets'oao le mosehla le bonesa kaofela.
• Teko ea boleng ba metsi: tlhoekiso ea metsi, tlhahlobo ea TDS ea boleng ba metsi.
• Setšoantšo sa Flushing: ha mochine oa metsi o kena sebakeng sa ho phalla, nako ea ho phalla e bontšoa pontšong ea bobeli.
• Tobetsa 'me u hatelle konopo ea flush bakeng sa ts'ebetso e qobelloang ea ho hlakola.
• Nako e telele{{0}tobetsa konopo ea flush ho seta khatriji ea sefe bocha (lekhetlo la pele ke ho felloa ke nako ha khatriji ea sefe)
• Tobetsa 'me u tšoare konopo ea flush hape bakeng sa RO reset. (Lekhetlo la bobeli ke cartridge le RO synchronous expiry)
• Bophelo ba cartridge: lihora tse 540 tsa tlhahiso ea metsi
• RO bophelo: lihora tse 1080 tsa tlhahiso ea metsi

 

 

Botenya ba Koporo	1oz
Min. Boholo ba lesoba	0.8 limilimithara
Min. Bophara ba Mola	0.5 limilimithara
Min. Sekheo sa Line	0.5 limilimithara
Qetello ea Bokaholimo	HASL
Boto ea Boto	Customized
Mocheso oa Mosebetsi	-20℃- +70 degree
Palo ea lihlopha	mekhahlelo e habeli
E lekantsoe matla a sebetsang	DC24V

 

 

• Runfeng ke-moetsi oa khale oa ho hloekisa metsi, o ikemiselitseng ho fana ka metsi a nooang a sireletsehileng le a hloekileng malapeng le lichabeng lefatšeng ka bophara. Boemo ba rona-ba--liboto tsa potoloho ea bonono li ka pele ho theknoloji ea rona e ncha, e netefatsang ts'ebetso e phahameng, e tšoarellang, le ho ts'epahala.
• Sehlopha sa rona sa litsebi tsa lienjineri le litsebi se sebetsa ka thata ho nts'etsapele le ho lokisa-boemo bo botle ba meralo ea rona ea potoloho, ho kenyelletsa le tsoelo-pele ea morao-rao ea thepa, tsamaiso ea motlakase, le lisebelisoa tsa software. Re sebelisa likarolo tsa boleng bo holimo 'me re khomarela polokeho le maemo a thata ho fana ka lihlahisoa tsa boleng bo ikhethang le ts'ebetso.
• Liboto tsa rona tsa potoloho li sebelisoa lits'ebetsong tse fapaneng tsa tlhoekiso ea metsi, ho tloha ho li-filters tse bonolo tsa li-countertop ho isa ho litsamaiso tse rarahaneng tsa{0}} tsa mekhahlelo. Re fana ka mefuta e mengata ea litharollo tsa tloaelo ho tsamaellana le litlhoko tse ikhethang tsa bareki ba rona, ho tloha ho saese e khethehileng le tlhophiso ea lithapo ho isa ho software e khethehileng le firmware.

 

 

 

 

Q1.Re hloka eng bakeng sa khotheishene ea PCB kapa PCBA?
PCB: Lifaele tsa Gerber/PCB, Bongata, lintlha tsa ts'ebetso ea boto (lisebelisoa tsa boto, botenya, botenya ba koporo, kalafo ea bokaholimo, 'mala oa maske a rekisoang le sekirini sa silika)
PCBA: Ka holimo ho lintlha tsa PCB, BOM e nang le lintlha tsa likarolo, tlhahlobo ea doc haeba u na le

 

Q2. Na re na le MOQ?
Ka kakaretso, 500-1000 lihlopha.

 

Q3. Haeba ke na le disampole feela, na nka li hlahisa?
Ee. Re ka e kopitsa le ho hlahisa ho latela mehlala ea hau.

 

Q4.Litšenyehelo tsa ho romella?
Litšenyehelo tsa thomello li ipapisitse le sebaka, boima ba 'mele le boholo ba ho paka. Re ka u qotsa ha tlhahiso e fela, kapa le pele tlhahiso e qala.

 

Hot Tags: ro pcb board, China ro pcb board baetsi, barekisi, fektheri