stSesotho

Liphanele le Li-Roll tsa FRP bakeng sa 'Mele oa Lilori tse Sehatsetsing

Liphanele le Li-Roll tsa FRP bakeng sa 'Mele oa Lilori tse Sehatsetsing
Selelekela sa Sehlahisoa:
Lipampiri le lirolo tsa rona tsa FRP li etselitsoe ka ho khetheha litopo tsa literaka tse nang le sehatsetsing le liphanele tsa tereilara. Li entsoe ka-ka likhalase tsa boleng bo holimo tsa fiber reinforced resin (EP) 'me li entsoe ka mokhoa o tsoetseng pele oa ho etsa pultrusion kapa compression molding process. Lihlahisoa li kopanya boima bo bobebe, matla a phahameng, ho hanyetsa kutu, ho hanyetsa boemo ba leholimo, ho kenya mocheso oa mocheso le sebaka se boreleli, e leng se etsang hore e be sebaka se setle sa lisebelisoa tsa tšepe tsa setso. Li ntlafatsa haholo ho tšoarella le matla a matla a lisebelisoa tsa lipalangoang tse nang le sehatsetsing.
Romela Inquiry
Tlhaloso
Technical Parameters

null

hobaneng o re khetha
 
The Part of a Refrigerated Panel Spec That Most Procurement Teams Skip

ke hobane'ng ha u khetha lihlahisoa tsa rona

 

Indastering ea kajeno e ntseng e hola ka potlako lefatšeng ka bophara ea thepa e batang, bapalami ba lihatsetsi le bahlahisi ba likoloi ba tobane le khatello eo ho seng mohla e kileng ea e-ba teng ea ho fokotsa litšenyehelo tsa ho sebetsa, ho ntlafatsa polokeho ea thepa le ho lelefatsa nako ea bophelo ea likoloi. Lisebelisoa tsa khale tse kang tšepe, aluminium le plywood ke khale e le litekanyetso tsa indasteri, empa li na le mathata a tlhaho: boima bo feteletseng bo ama ts'ebetso ea mafura hampe, ho bola ho khutsufatsa nako ea bophelo, ho hanyetsa mongobo ho lebisa ho theoheng butle-butle ts'ebetsong ea ho kenya letsoho, 'me litšenyehelo tse phahameng tsa tlhokomelo li senya menyetla ea phaello.

 

Ka lilemo tse fetang mashome a mabeli, re tsepamisitse maikutlo ho faneng ka-matlapa le lirolo tsa polasetiki tse matlafatsoang ka likhalase (FRP) bakeng sa literaka tse nang le sehatsetsi le liphanele tsa tereilara. Litharollo tsa rona tsa FRP li rarolla mathata ohle a thepa ea khale, li fana ka mefuta e meng e bobebe, e tšoarellang, le ea theko-e sebetsang hantle, 'me joale ke khetho e ratoang bakeng sa mefuta e meholo ea lihlahisoa tse batang Amerika Leboea, Europe le Australia.

 

 

 

 

Melemo ea Bohlokoa

Bobebe & Matla a Phahameng 

• Ka boima ba 1.5-2.0 g/cm³ feela, e bobebe ho feta tšepe ka 60%, e fokotsa boima ba koloi ka katleho le ho eketsa bokhoni ba thepa le moruo oa mafura.

• Matla a phahameng a matla le a flexural, a finyella litlhoko tsa ts'ebetso ea mechine ea maemo a thata a lipalangoang.

01

Khanyetso ea Corrosion

• E hanyetsana le li-acids, alkalis, matsoai le metsoako e fapa-fapaneng ea lik'hemik'hale, e loketseng lisebelisoa tse senyang tse atisang ho kopana le lipalangoang tse entsoeng ka sehatsetsing, tse kang meriana e bolaeang likokoana-hloko le masalla a lijo tsa leoatleng.

•Bokaholimo bo sebetsa ka mokhoa o khethehileng, e leng ho etsang hore bo se ke ba hlola botsofali-ho hana{1}}, 'me bo sebetsa nako e fetang lilemo tse 10.

02

Insulation e phahameng ea Thermal

• Conductivity e tlaase ea mocheso, e kopantsoeng le lisebelisoa tsa motheo tsa PU foam, e lumella kamore eohle hore e finyelle litlhoko tse feteletseng tsa ho laola mocheso ho tloha ho -40 ho ea ho 60 degree.

• Seamless splicing ts'ebetso e felisa liphello tse batang tsa ho koala, ho netefatsa boleng ba thepa.

03

Ho Hlophisoa ho Bonolo

• Mefuta e tloaelehileng e fumanehang (botenya: bo hlophisitsoeng; bophara: bo hlophisitsoe (ka tlase ho 3.4m); bolelele: bo hlophisitsoeng), bo tšehetsang ts'ebetso ea bobeli (ho khaola, ho cheka, ho tlama).

• Masoba{0}a kentsoeng esale pele bakeng sa likarolo tse kentsoeng, ho ikamahanya le mekhoa e tloaelehileng ea ho kopanya literaka ka sehatsetsing le ho khutsufatsa nako ea tlhahiso.

04

Litšenyehelo-Ho sebetsa hantle

• Litšenyehelo kaofela ha li bapisoa le tšepe e sa hloekang le aluminiamo, 'me ha ho na litšenyehelo tse haufi le- tsa ho lokisa.

• Tšireletso e phahameng ea ts'oaetso e fokotsa kotsi ea tšenyo nakong ea lipalangoang, ho fokotsa litšenyehelo tsa inshorense le tlhokomelo.

05

Linyeoe tsa Kopo

 

Fiberglass Reinforced Plastic Truck Body Panel

Khamphani ea thepa ea thepa e batang ea Europe

Ka ho sebelisa liphanele tsa FRP (fiberglass reinforced plastic) ho nchafatsa likepe tsa literaka tse nang le sehatsetsing, boima ba lebokose la thepa bo fokotsehile ka 35%, tšebeliso ea mafura e fokotsehile ka 12%, mme sekhahla sa tšenyo ea thepa se fokotsehile ka 18%.

Application Trends of FRP Sheets in Cold Chain Logistics

Lik'hamphani tsa lipalangoang tsa lijo tsa leoatleng tsa Australia

Khanyetso ea kutu ea metsi a leoatle ea maqephe a FRP e eketsa nako ea ho lokisa koloi ho fihlela lilemo tse 5 mme e fokotsa litšenyehelo tsa ts'ebetso ka 20%.

FRP Van Body Lining Panels: Why Mechanical Performance Specs Matter More Than Surface Finish

Phepelo ea lijo tse ncha

Lorem ipsum dolor sit amet,consectetur adipisicing elit. Ho bohlokoa ho etsa joalo ka ha ho hlokahala hore ho be le lihlahisoa tsa lihlahisoa tsa lihlahisoa tsa lihlahisoa tsa lihlahisoa tsa lihlahisoa tsa khale. Sunt nam mollitia, accusantium voluptates

LBH

P: Na e tla le waranti?

K: Re na le ts'epo ea boleng ba lihlahisoa tsa rona, ke ka lebaka leo re fanang ka tiisetso e etelletseng pele ea lilemo tse 10 ho li-FRP tsa rona. Tiisetso ena e akaretsa liphoso tsohle tsa thepa le tsa moetso, ho kenyeletsoa delamination, cracking, le ho fela ho sa tloaelehang. Haeba maqephe a hau a e-na le mathata leha e le afe nakong ea tšebeliso e tloaelehileng nakong ea tiisetso, re tla e nkela sebaka ntle ho tefo. Tiisetso ena ke bopaki ba hore re na le tšepo ea ho tšoarella le ho sebetsa ha lihlahisoa tsa rona.

P: Na liphanele tsa FRP gel-tse koetsoeng li na le litlhokahalo tsa ho hanyetsa boemo ba leholimo lits'ebetsong tsa kantle?

K: E loketse ka botlalo bakeng sa tšebeliso ea kantle 'me e kopana le litlhoko tsohle tsa boemo ba leholimo-ba ho hana. The premium FRP gel-coat surface e na le liphetoho tse khethehileng hore e se ke ea tsofala ka lebaka la UV{3}}, 'me e etsa bonnete ba hore motho o phela lilemo tse fetang 10-15 ntle le ho ba mosehla, ho petsoha kapa ho chokoa. Bakeng sa libaka tse phahameng-tse nang le mahlaseli a matla a UV, ho na le mofuta o ikhethileng oa UV{8}}o hanyetsanang le ona; Ho hloekisa kamehla ho tlosa lerole ke sona feela se hlokahalang, ntle le tšireletso e eketsehileng ea UV e hlokahalang.

P: Na FRP gel{0}}liphanele tse koahetsoeng li ka sebetsoa hape-joalo ka ho cheka, ho seha, kapa ho kobeha?

A: Ts'ebetso ea bobeli e ka khoneha; lintlha tsa bohlokoa tsa ts'ebetso li kenyelletsa: ① Ho seha: Sebelisa sakha ea motlakase kapa grinder ea angle, ho netefatsa tšireletso e nepahetseng ea lerōle; ② Ho cheka: Sebelisa mochine oa motlakase o tšoaroang ka letsoho o nang le alloy bit, ho laola lebelo la ho potoloha ho thibela ho phunyeha; ③ Ho khumama: Ho kobeha ka letsoho hoa khoneha bakeng sa botenya bo ka tlase ho 3mm, ha ho futhumatsa ho hlokahala bakeng sa botenya bo fetang 3mm; ④ Ho kopanya: Sireletsa ka ho sebelisa sekhomaretsi kapa li-rivets, 'me u netefatse tiiso e nepahetseng. Qoba lehlabathe le feteletseng la lera la seaparo sa gel ho thibela ts'ebetso e senyehileng.

P: FRP gel-liphanele tse koahetsoeng li lokela ho hlokomeloa joang letsatsi le letsatsi?

A: Tlhokomelo e bonolo ea tloaelo: ① Ho hloekisa: Hlakola ka metsi a hloekileng kapa sesepa se sa nke lehlakore; se sebelise borashe bo thata- kapa li-acid tse matla/alkalis. ② Tlhahlobo: Hlahloba likhoeli tse ling le tse ling tse tšeletseng bakeng sa lisebelisoa tsa ka ntle le selemo le selemo bakeng sa tse ka hare; alafa mengwapo e menyane ka ntho e kgethehileng ya ho lokisa. ③ Tšireletso: Qoba ho ts'oaroa ke lintho tse boima le ho hoholoa ka lintho tse bohale ho thibela tšenyo ea lera la seaparo sa gel.

Iteanye le rona

Bakeng sa lipotso le litaelo, ka kopo ikopanye le rona ka:

E{1}mail:{0}}

Mohala:{0}}

Whatsapp:+86-13373155141

 

 

 

 

 

 

Hot Tags: FRP Panels le Rolls bakeng sa Mebele ea Lilori tse Sehatsetsing, China FRP Panels le Rolls bakeng sa bahlahisi ba Mebele ea Lilori tse Sehatsetsing, barekisi, feme.

U kanna oa rata
Romela Inquiry